FALL IS THE PERFECT TIME FOR PLANTING AND SPRUCING UP A YARD. Â THE NEXT FEW MONTHS ARE IDEAL CONDITIONS FOR PLANTING TREES, SHRUBS, BULBS, OR WINTER ANNUALS. Â EVEN IF YOU NEED TO COMPLETE A GRASSY AREA, SOD OR SEEDING CAN BE DONE AT THIS TIME. Â FOR OPTIMUM GROWTH DO NOT FORGET THE IRRIGATION. Â IT IS ESSENTIAL.
NOW IS ALSO A GREAT TIME TO INSTALL A SWIMMING POOL. Â IF YOU ARE CONSIDERING A SWIMMING POOL, LET US INSTALL IT AND LANDSCAPE AROUND IT TOO.
Oct 18
Deciduous trees with high spreading canopies planted on the south side of your house will provide much needed summertime shade.
In the fall, the trees will lose their leaves to provide the much needed sun in the winter.
Shading your air conditioning unit can save you as much as 10%.
Reduce the amount of turf on your property. This will result in less water use and pollution. Instead convert that turf to drought tolerant plants, and don’t forget the mulch to conserve moisture and prevent weed growth.
It’s the planting season, call now and let us help with the fall trees, shrubs, and annuals.
A sprinkler system that waters around corners or big bushes, and will effectively water irregularly shaped yards or tall gardens is fairly easy to make. It comprises two-to-four above-ground, plastic-pipe-raised spray nozzles connected in tandem by one-to-three hose remnants.
Because these stake-anchored raised nozzles can give from one-to-360-degree spray patterns, they can be used for almost any sprinkling job. For example, at the 180-degree pattern settings, the system can be used along property lines, fences, walks, narrow strips of yard, and at square or round corners. At the 360-degree settings, it can be used anywhere in the midst of lawns or flower and vegetable gardens where it will put water into the hard-to-get areas. Because of these capabilities, its users need not worry about disgruntled neighbors or walkers who are affected by the spray going beyond set boundaries.
Additionally, a tall system of two-to-four risers can be left in a tall flower or vegetable garden during the entire growing season. Just connect an outside hose to it, and let it sprinkle. Furthermore, because the connecting hoses are easily bendable, the nozzle-risers themselves can be placed anywhere as needed, e.g., back-to-back, back-to-side, staggered, close-together, far apart, or in a circle or square. Thus, a preset spray pattern of 180-degrees takes care of most sprinkling situations. The parts for this system can be found in most hardware outlets for less than $50.
Parts for making a four-riser system for a lawns or gardens
Note: if the 15-foot hose remnants are not available at local stores, make your own by cutting down a longer hose to that or desired lengths, and then add male/female hose connectors (purchased separately) to these pieces. The final cost is about the same as above.
To make the above nozzle-risers, do the following steps.
1. For grass lawns and low-growth gardens, cut four 2½-inch risers (nipples) from the ½-inch plastic pipe. For tall gardens, cut four 1½-feet risers from the ½-inch plastic pipe. Note: the system for the tall gardens is made exactly the same way as the one for lawns, except the risers are cut to 1½-feet in length instead of 2½-inches.
2. Remove any shavings from the inner and outer edges at both ends of each riser.
3. Cement a male adapter to each end of each riser following the directions on the can.
4. Let the cement dry overnight.
5. Screw-tighten one spray nozzle and one stake to the opposite ends of each riser.
6. Adjust the spray pattern for each nozzle to 180-degrees (half circle) or as needed. Align the spray pattern parallel to the hose connections on the stake.
7. Connect the risers in tandem with the hose remnants. Cap the far-end connection. For convenience, add a short piece (about two-feet in length) of hose to the first riser. It is easier to connect an outside hose to another hose than to the ground stake itself.
When all four risers are connected in tandem, the 180-degree spray patterns average about 20 feet in diameter at full force, depending on the water-pressure and wind conditions at the time. Thus, the spray patterns overlap slightly for complete watering. For watering narrow strips of yard or garden, place the risers closer together under a reduced water flow, which reduces the size of the patterns. If patterns other than 180-degrees are needed, adjust the nozzles accordingly, i.e., 90-degrees (quarter circle) or 360-degrees (full circle).
Normally, the 5/8-inch-diameter hoses work well for the small yard and garden. Yet the larger hoses (e.g., 3/4-inch diameter) will make the patterns slightly larger. These patterns can also be enlarged slightly by removing one or two of risers from the system, which puts more water pressure on the remaining nozzles. Under any of these arrangements, the nozzles themselves spray water efficiently.
Ten-to-15 minutes of sprinkling will saturate the lawn or garden with aerated water. For the best results, according to the experts, do this watering early in the morning, late in the evening, or in the shade. For more information on sprinkling yards, see these sites.
Article Source: http://EzineArticles.com/?expert=J_Delms
Jul 23
Rain Bird manufactures a full line of irrigation controllers, rotary sprinklers, pop up spray head sprinklers, sprinkler nozzles, irrigation valves, drip irrigation and more for lawn watering, residential irrigation, commericial irrigation, agricultural irrigation and golf course irrigation. As a leader in irrigation for over seven decades, Rain Bird is committed to The Intelligent Use of Water.
Hunter sprinklers are made by Hunter Industries, which is one of the bigger companies that offer irrigation products. Their main competitor is Rainbird. On the surface, there doesn’t seem to be much different between the two, but when you really begin taking a closer look you will find some unique products being offered by Hunter. Here is a closer look at these lawn sprinklers.
While the spray heads are largely designed the same way, the key difference is in the rotators. The Hunter sprinkler PGP rotator sprinkler head is designed in an innovative way that allows it to prevent materials from getting into the rotor, so that the sprinkler head isn’t easily damaged.
When considering sprinklers, keep it mind that Hunter has a whole line or irrigation products. They are a quality brand because they have built their reputation on performance and durability, not just on price point. That is why they have been a leader in the irrigation industry for many years.
When looking at the different options, you’ll notice that they have both residential and commercial rotors. Also, there are different options available for spacing considerations. The range consists of rotors that can be spaced as closing as 15 feet apart, all the way up to 90 feet.
What are some of the uses for the different models they have? There are models designed specifically for the following applications: residential, commercial, institutional, athletic fields, areas where high vandalism occurs, low pressure areas, and there are also riser-mounted sprinklers available.
As we discussed earlier, this company has really made a name for themselves because of their rotators. These innovative rotators have been designed with maximum water efficiency in mind, and are considered essential in the turf and landscape industry.
The great thing about these rotators is that they can fit on top of both conventional spray head bodies as well as shrub adapters. You now can control the application rate, the arc and even adjust the radius of the water spray.
If you’ve had pressure issues with you current sprinkler, consider updating your older model with one of these newer models with a rotating head.
Other products that Hunter has to offer include spray nozzles, valves, controllers, sensors and water conservation products. Who uses these Hunter sprinkler units? Contractors, landscapers, turf managers, municipal groundskeepers and your regular old Joe Homeowner.
Article Source: http://EzineArticles.com/?expert=Terry_Edwards
